Medical Air Solutions, LLC

Cleanroom Ceiling Systems

These gasketed, air tight, all metal ceiling system panels were developed as a cost-competitive alternative to solid and narrow screw-slot extruded aluminum tee-bar systems.  Assembled by means of patented two-piece clips, these ceiling panels are an aesthetically pleasing system that accommodate low-cost square-edge lay-in acoustic panels. For further detailed information, performance and layout specifications for any specific room configuration specifications, please contact your nearest MAS representative or call our engineering department at: 770-377-3884. 

 Applications

These ceiling systems can be used in any application where air tight ceiling installation is critical such as; surgical suites and isolation rooms where there is an open plenum above the drop ceiling, or in pharmacy compounding areas (CSP) to meet the new USP <797> standards. These ceiling systems are appropriate in any space where steel tees or other unsealed extruded aluminum ceiling products would be installed.

 Fully Accessible

A major feature of these ceiling panels is that it can be easily removed and reinstalled providing access to the plenum space. Occasionally mechanical or electrical equipment fail requiring large areas of the ceiling to be removed and some applications require that the entire ceiling be removed for cleaning the plenum space above the ceiling. Two-piece universal assembly clips which allow the grid to be easily removed and reinstalled are used.

Finish
The standard finish for our cleanroom sealed ceiling panels is B12 off white powder coating.

For optional and special finishes including anodizing see MAS for a color matrix.

Installation

·         Install ceilings to heights indicated on the plans and specifications to a tolerance of 1/8” in 12’-0” (or 3mm in 3600 mm).

·         Temperature and humidity during installation of the ceiling is important. The system shall not be installed when the temperature in the area is under 60°F or over 85°F (16°C or over 29°C), or if the humidity is above 80 percent.

Features/Benefits

·         Accepts square-edge lay-in panels; panels are easily installed and removed for full plenum access.

·         Unique connector clips provide rapid ceiling installation of ceiling members.

·         Continuous screw slot for attaching partitions without damaging ceiling members.

·         Thru-slot intersections for aesthetically pleasing appearance.

·         Design flexibility - several profiles to choose from in any module size.

·         Extruded aluminum construction for clean, crisp lines, maximum durability and rust proof performance. Choice of painted or anodized finishes.

  © 2000-2010 ◘ Medical Air Solutions, LLC All rights reserved DUNS 07-635-5549