Medical Air Solutions, LLC

HealthPro Air Purification Systems

Professional Design Advances

HyperHEPA Performance
While conventional HEPA air cleaners on the market today don’t typically produce 99.97% clean air at 0.3 microns, this kind of efficiency is possible. The HealthPro takes the official 99.97% HEPA filter efficiency and applies it not only to the filter, but to the entire air cleaner. This is referred to as HyperHEPA performance and relies on four critical elements:

• High-efficiency pre-filter
• Cleanroom grade HEPA filter (U.S. patent pending)
• 3-D seal creates an airtight device (U.S. pat. pending)
• Fan positioned before the HEPA filter

HyperHEPA isn’t just hype. Here’s the real HyperHEPA difference: the air coming out of a HealthPro is 99.97% particle-free at 0.3 microns and larger. At that size range, with one million particles being drawn into a HealthPro air cleaner, less than 300 particles will emerge. In comparison, an air cleaner with an overall system efficiency of 70% will still have 300,000 particles in its so-called "clean" air flow.

HealthPro Captures the Smallest of Particles
While the efficiency of HEPA filters is traditionally measured at 0.3 microns, over 90% of all airborne particles in homes and offices are smaller than 0.3 microns. Most air cleaner manufacturers make no reference as to their efficiency for this important particle size range.

Our guarantee is simple: we guarantee that every HealthPro captures and retains at least 99.97% of all particles equal to or larger than 0.3 microns and at least 99% of all particles smaller than 0.3 microns. Our efficiency guarantee even applies to particles the size of viruses, usually some 30 times smaller than 0.3 microns, the traditional HEPA reference point. With this guarantee, you can rest assured that even the smallest of allergens are filtered and retained with at least 99% efficiency. Guaranteed.

What You Need to Know about Air Delivery Rates
To be effective, an air cleaner must clean the air in a room several times per hour. The amount of air that an air cleaner filters is called its air delivery or airflow rate. Many manufacturers make misleading statements about air delivery rates. Some state the fan’s free-flow capacity without filters installed. When filters are installed it is not uncommon for actual air delivery to be less than 30% of the fan’s free-flow capacity. Even when manufacturers state the airflow rate with all filters installed, their air cleaner’s actual airflow is often significantly lower. This is due to optimistic guesswork and "best-case-calculations" rather than factual, scientific measurements.

We gives you peace of mind. We address these typical misconceptions by certifying and guaranteeing the actual air delivery rate of each and every HealthPro air cleaner.

Gas Filters & HiFlow Technology
Many conventional air cleaners feature some type of activated carbon filter for the control of gaseous pollutants or odors. There are two common types of activated carbon filters. The least efficient consist of activated carbon pads. Activated carbon dust is glued to the surface of a synthetic fiber pad. The second type, granular carbon, is more efficient in absorbing gases and odors. Unfortunately, granular carbon drastically reduces the airflow capacity of air cleaners, making them less effective in improving your indoor air quality.

The HealthPro Plus uses HiFlow technology to enhance the effectiveness of granular activated carbon, without drastically reducing the airflow rate. Rather than using a thick layer of large carbon granules that obstruct the air flow, the HiFlow filters spreads smaller activated carbon granules between two fabric layers which are pleated to maximize the surface area.

Which HealthPro Model is Right for You?
We make the HealthPro available in two models: one with particulate filtration and the other with additional gas phase filtration. The patented, modular design of the HealthPro gives you the option to add or remove the gas phase filter at any time. The HealthPro offers unparalleled performance for those who desire the best air cleaner available.

HealthPro: For Allergy Sufferers

The standard HealthPro is recommended for allergy sufferers who don’t have any particular need for gas or odor control. Instead of an activated carbon filter the HealthPro features a pressure equalization chamber between the fan and HEPA filter to maximize air delivery (see Hourly Air Change Chart). It is also more economical since there is no activated carbon filter to replace.

HealthPro Plus: For Asthma Sufferers

In addition to the filtration provided by the standard HealthPro model, the HealthPro Plus contains a gas phase filter for the control of gaseous contaminants and odors. The HealthPro Plus is especially recommended to asthma sufferers, since their respiratory systems are often sensitized to gaseous irritants, as well as allergens.

Advanced Controls
The unit provides five fan speed settings and a sophisticated filter monitoring system that calculates the remaining life of each individual filter. The unit also features an integrated timer and a remote control.

  © 2000-2010 ◘ Medical Air Solutions, LLC All rights reserved DUNS 07-635-5549